Switch Safety

Archive for the ‘Project’ tag

Things You Need To Know For Your Next Plumbing Project

without comments

If you're a homeowner and have had to call a plumber to fix a problem, you know how expensive and annoying it can be. Wouldn't it be great if you could fix your plumbing yourself? Well, it might be easier than you think! Read on to find out how.

Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people's mistakes can make the difference of saving or losing money.

Keep your plumbing flowing by maintaining a temperature above 32 degrees and wrapping up any exposed pipe works. Obviously, frozen pipes occur due to freezing environmental conditions. If pipes do freeze, the best possible scenario would include taking time for the pipes to thaw and any frozen water to drain. They could also burst costing you a lot of money and repairs.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Clean the aerator to adjust water pressure issues which result from sediment build up. To clean the aerator, you first want to disassemble the faucet and remove it. After that, remove the aerator and scrub it clean with a fine brush. You can use vinegar or some other type of cleaning solution to assist in the task. Finally, rinse off the aerator, put it back together and then reattach it to your faucet. Remove the sediment from the aerator to increase water pressure.

To protect your money from unsavory plumbers, always get a written estimate before paying a cent or committing to a project. Good businessmen know to under-promise and over-deliver to savvy customers. Once a stated number is given, it is highly unlikely that your plumber will exceed the projected costs of the project.

Never hire a plumber that is not licensed, insured and bonded. If the plumbing company cannot provide you with reference numbers for their credentials, move on quickly. It is a common question and it should be a no-brainer for them to provide them to you. If they have issues with you asking, take that as a big red flag.

Have a specific plumber in mind before you have an emergency. Most people don't think about plumbers until they find themselves having a big problem that needs to be fixed right away. Instead, choose a plumber who you are comfortable with and whose experience you trust--way before you actually need his services.

If you have a crack in your toilet tank, you can sometimes fix this with an epoxy resin. However, it is very difficult to keep up with this type of maintenance, and the best bet may be contacting the supplier and ordering a new tank to be installed in your bathroom. Nevertheless, keeping some epoxy resin on hand for emergencies is a good idea.

A competent plumber will need many skills in addition to knowing the basics of water and pipes. One of the most common things that a plumber works on is fixing water lines.

When facing temperatures below freezing in the winter it is important to leave the hot water dripping. This makes sure that the pipes don't freeze over and saves you the expensive repair of fixing and or entirely replacing a broken pipe. The slight cost of dripping hot water is well worth saving you from that large expense of replacing a broken pipe.

As you can see, solving your plumbing problems yourself can be a satisfying way to save money and take care of your house independently. Next time you have a plumbing problem, you'll be ready to tackle the issue yourself with the tips you've taken from this article.

More Plumbing Articles

Written by admin

May 12th, 2018 at 5:29 am

Posted in Articles

Tagged with , , , , ,